                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2410383
Command and Conquer Mammoth tank 1/35th scale by apievuist is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

<b>NOTE: If you made this thing, please post some photo's. I would really appreciate it!</b>

This is a fully printable model of the Mammoth Mk. III better know as the Mammoth Tank of the various Command and Conquer games.

The Mammoth Mk. III (GDI designation: Mammoth 27) is a GDI heavy assault tank that entered service prior to the Third Tiberium War. At the time it replaced the Mammoth Mk. II walker as GDI's premier land assault unit.
Source: http://cnc.wikia.com/wiki/Mammoth_Mk._III

<b>
Also check out the GDI Firehawk:</b>
https://www.thingiverse.com/thing:2431192

<b>
And GDI Juggernaut:
https://www.thingiverse.com/thing:2456572</b>

# Original Model

I cannot take credit for the design of the original model. Original, <b>non-printable</b> model here: https://grabcad.com/library/mamonth-tank-1


# Background

My son needed a new bedroom, because he will turn 8 soon and was still sleeping in a "Captain Sharky" pirate room. He is a big fan of Command and Conquer 3 - Tiberium Wars. So we decided his next room would be built around the Command and Conquer theme.

After a lot of searching on ebay, aliexpress etc. I could not find any merchandise of these games. So i decided to print something for him. The Mammoth Tank seemed like an excellent choice, being an iconic unit of these games.

I searched a long time for a detailed model that could be printed. No luck. 
Until i stumbled upon the model mentioned above. I dissected that model, made it printable and added various details.


# Print Settings

All stl files are oriented the way they should be printed.
All stl files fit a 20x20cm printbed.
The final model will be approx. 50 x 25 cm (19.6 x 9.8 in.)

Layers:
0.15

Support:
Print without support, in exception of the turret and the various "UpperPart" models (e.g. RearRightTA-UpperPart.stl)

Infill:
5-15% (i printed everything on 15%, but i think less would work too)

Rafts:
No rafts

Quantity:
<i>All models <b>not</b> mentioned here should be printed once</i>
Axle - 4
Pin - 3
Trackv2 - 90


# Assembling

Assembling this model should be pretty straightforward. I attached some pictures to show some of the assembling process.


<h5>Tracks</h5>
Snap off the added supports and clean up the holes with a 1mm or 1.5mm drill bit
The tracks connect with a piece of 1,75mm filament.

![Alt text](https://cdn.thingiverse.com/assets/8d/71/32/31/b9/RearAssembly.png)
Rear track Assembly (uses M3x20 Allen screws)

![Alt text](https://cdn.thingiverse.com/assets/01/d5/52/54/25/ChassisAssembly.png)
Chassis Assembly (Chassisback, Chassisfront, 3x ChassisPin)

![Alt text](https://cdn.thingiverse.com/assets/d7/0f/c4/cf/0e/TurretAssembly.png)
Turret Assembly (Turret, TurretDisc, TurretPin)

# Changelog

30-6-2017 - Initial release
7-7-2017 - Added missing turret pin